U1 Processor
- Package
- BGA, 0.4 mm pitch
- BOM
- Line 14 of 61
- Maker's lot
- —
- Packaging
- —
- Received
- —
- Process
- SMT, nitrogen reflow
- Inspection
- AOI · X-ray
Example record. Values are illustrative.
Surface Art
We assemble and test printed circuit boards for medical device companies. ISO 13485 certified, with full lot traceability.
Not a customer's product.
Surface Art Engineering, Inc.81 Bonaventura Dr, San Jose, CA 95134
Since 1995Building boards in San Jose
ISO 13485Medical devices, since 2012
Lot traceabilityPart lot to board serial
IPC-A-610To the class you specify
Traceability
ISO 13485 asks a manufacturer to trace what goes into each lot. On a circuit board that means every reel, tray and tube: the maker's lot and date code, when it arrived, how it was placed and inspected, and which serial numbers it ended up in.
So when a component maker flags a lot, the records show which of your boards it went into.
Drag to turn the board. Click any part, down to a single resistor.Tap any part on the board, down to a single resistor.
Example record. Values are illustrative.
Quality system
An ISO 13485 certificate is only as useful as its scope. Ours names the work you're buying, word for word.
Certificate summary
ISO 13485:2016
Medical devices: quality management systems
Surface Art Engineering, Inc.
81 Bonaventura Drive, San Jose, CA 95134
Scope“The contract manufacturing and testing of printed circuit board assemblies for the medical device industry.”
Also certified to ISO 9001:2015 · UL Registered Firm
Build traveler Every medical build, in order
Lot 26-1107 · Rev C
We ask for the BOM in Excel with manufacturer part numbers and pull the datasheet for every part. Questions and assumptions go back to you in writing before the quote does.
On every build, before parts are bought: footprints, testability and anything on the BOM that's hard to get or near end of life.
Each reel, tray and tube is logged to its maker's lot, so every part on the board can be traced back.
Four Juki SMT cells with nitrogen reflow, then wave, selective or hand soldering. SAC 305 lead-free or Sn63/Pb37, as your drawing calls for.
Automated optical inspection on every build. X-ray for BGAs and other joints you can't see. Flying probe where it fits.
Functional and in-circuit test fixtures, run to your test procedure.
Workmanship to IPC-A-610 at the class on your drawing. The lot's records stay on file with the build.
Track record
Complete units, not just the boards inside them. Our line in San Jose kept running through COVID.
We've held ISO 13485 certification for medical device work since 2012, building precision assemblies for diagnostic and life-science instruments. We don't name our customers.
We publish our real on-time delivery and return rates every six months. We haven't found another contract manufacturer that publishes its monthly RMA rate.
| Month (2026) | On-time delivery | RMA rate |
|---|---|---|
| January | 99.38% | 0.00% |
| February | 99.82% | 0.02% |
| March | 99.79% | 0.00% |
| April | 99.97% | 0.00% |
| May | 100.00% | 0.10% |
| June | 99.91% | 0.04% |
On time means delivered by the date you requested and we quoted. The RMA rate counts every return, not only confirmed workmanship faults, and charges it to the month the units shipped, so recent months can rise as later returns come in. Unit counts aren't published. Source: the Care Factor section of surfaceart.com.
“Working with Surface Art over the past 15 years has been a wonderful experience. Every product I have received has met my quality requirements and I have never had to return anything for re-work. I have yet to find another manufacturer that can match them on quality and lead time.”
“I have worked with Surface Art for over 20 years. They have never missed a shipment nor had a quality issue that impacted any of our clients. I would recommend SAE to any and all potential clients who value a high-level contract manufacturer. They are best in class.”
“Surface Art have been my go-to PCB assembler, turn-key manufacturer, and rework service provider when the project required quality, short turn-around, and reliable service. Over 25 years, I cannot recall a single major mistake or defect that impacted our execution.”
Guides
Choosing a contract manufacturer for the boards in a medical device: who the manufacturer is, quality agreements, supplier controls, traceability and quotes.
How to read and verify a CM's ISO 13485 certificate, which clauses matter for PCB assembly, how it differs from ISO 9001, and what certification doesn't prove.
FDA's QMSR took effect Feb. 2, 2026 and brings ISO 13485 into 21 CFR 820. What changed, whether it covers PCBA and component suppliers, and what to ask yours.
FAQ
Something else? Email Sales@surfaceart.com or call (408) 433-4700.
Yes. Surface Art Engineering, Inc. is certified to ISO 13485:2016 by DQS Inc. (registration no. 10000495 MP2016) for “the contract manufacturing and testing of printed circuit board assemblies for the medical device industry.” We were first certified in 2012, and the current certificate is valid until March 24, 2027. We're also certified to ISO 9001:2015.
Yes. We have full lot traceability: every component on a board can be traced to its manufacturer's lot, and every lot to the boards built with it. If a component maker flags a lot, the records show which boards it went into.
IPC-A-610, at the class you call out on your assembly drawing: Class 2 or Class 3. If you're deciding between them, our guide on IPC Class 2 vs Class 3 explains the difference and the cost.
Both. Most medical programs bring us their printed circuit board assemblies. We also do box build: cables and harnesses, enclosure integration, functional test and labeling. During COVID we built complete ventilators.
Automated optical inspection (AOI) on every build, X-ray for BGAs and other hidden joints, flying probe, and functional or in-circuit test fixtures run to your test procedure.
The bill of materials in Excel with manufacturer part numbers, Gerber, ODB++ or IPC-2581 files, the centroid file, a PDF assembly drawing that states your workmanship standard, the quantities to price plus annual volume, and your test requirements. We pull the datasheet for every part and send our questions and assumptions before we quote.
Yes, when the volume fits. We build prototypes and NPI runs in San Jose and can carry a program into production from there.
Both. We build with SAC 305 lead-free and with Sn63/Pb37 leaded solder. Your drawing decides.
In our facility at 81 Bonaventura Drive, San Jose, California, where we've built boards since 1995. For programs that need it, we build on bare boards from US fabs.
Yes. We publish our monthly on-time delivery and RMA rates every six months. For January to June 2026: 99.81% of units delivered on time and 0.02% returned. We're one of very few contract manufacturers that publish actual delivery and quality data.
Request a quote
We reply by email with our questions and assumptions, then the quote. You can send files once we reply.
We'll reply to with our questions and assumptions, then the quote.