Current page:

Home

/

product

/

Pcb board assembly rigid pcb

Contact

contact

Phone:
+86 755 26978877

E-mail:
pcba15@fastpcba.cn

WhatsApp:
+8613422897489

ADD:
Shenzhen Guangming yulv Village Road Jade Spring beauty industrial district 18-1 building 3 floor

Pcb board assembly rigid pcb

Sales Manager:Eva

E-mail:Any question can leave message, Please send E-mail to pcba22@pcb-smt.net, We will reply you as soon as possible. Thank you! Wish you have a nice day.

Phone:13418481618/ Tel:400-9309399/ +86 0755-26978877 Fax:+86 0755-26978080

Description of products:This product is a semi-finished product for a customer of our company. The picture is for reference only. The technical parameters are subject to the actual GERBER file!

  • Details

Professional custom Dynamic electrocardiogram analyzer board pcb
Basic information about the product:
Product Classification: PCBA
Product code: 2K1006B0-PCBA
Product Name: BOARD ID 0253 V1.09 AzRy. GeMe.”
Circuit board use: crane
Pcb sheet information: double sided FR4, board thickness 1.6MM, copper thickness 1OZ, lead-free spray tin, green oil white
Number of orders: 820
Production cycle: 6 days
Project requirements: pcba one-stop


Product process description:
Production process: lead-free process
Process flow: smt+dip+ packaging
Furnace experiment: All self-purchased plastic molded patch materials must pass the reflow test
Solder paste requirements: Ag3.0/Cu0.5/20
Welding requirements: 1. Firstly produce the BOTTOM surface, that is, the T10 number surface. It is necessary to evaluate whether the heavy parts will be dropped when the second side is produced, and carry out the corresponding pre-pointing red glue operation (be careful not to cause secondary defects). 2. The mounting direction of the large module, please refer to the figure. The U3 number module is also shown with reference to the drawing. 3.U7, U8 bit number intermediate pad plus solder paste to ensure good soldering of C and pad, be careful not to Cause a short circuit, etc.
Inspection requirements: General Standards implement IPC-610E-2
Welding method: manual soldering, soldering iron temperature 370 degrees, and tin penetration rate of 75% or more. The two pins of the SOK2 bit patch card holder should be tinned from the reverse side.

 

Product Name:Pcb board assembly rigid pcb

Hot products