/Manual soldered circuit board tool – electric soldering iron
Manual soldering is often used during pcb manufacturing process , such as plug-in components, if the number is less, manual soldering is generally selected. So the main tool for manual soldering and rework is the electric soldering iron (referred to as soldering iron). For pcb assembly components (SMD) and BGA, CSP, QFN, etc., special equipment is required for rework.
There are many types of soldering irons. Different soldering methods use different soldering iron heads. According to the soldering iron heating method, there are direct heat type, heat sensitivity, constant temperature soldering iron, smart soldering iron, suction tin pump, hot air soldering station, etc. The most commonly used electronic soldering is anti-static constant temperature soldering iron, smart soldering iron and so on.
The anti-static constant temperature soldering iron head is equipped with a temperature controller or a temperature control component with magnet, and the constant temperature is achieved by controlling the energization time. When the power is turned on, the temperature of the soldering iron rises. When the predetermined temperature is reached, the magnet is removed due to the strong magnet sensor reaching the Curie point, thereby disconnecting the core contact and stopping the supply of power to the soldering iron. When the temperature is lower than the Curie point of the strong magnet sensor, the strong magnet recovers the magnetism, and the permanent magnet in the core switch is sucked, the contact point of the control switch is turned on, and the electric flame is continuously supplied. Cycled in this way to achieve the purpose of controlling the temperature. The structure and principle of the antistatic constant temperature soldering iron are shown in Figure 1
Dear Customer At the beginning of the new year, Vientiane is renewed. All employees of FASTPCBA International Co., Ltd. deeply thank you for your long-term support and love to our company. I sincerely send you my sincere blessings and greetings. In the new year, our company w...
① Standard components should pay attention to the dimensional tolerances of components from different manufacturers. Non-standard components must be designed in accordance with the actual size of the components and the land pattern and the space between the land. ② When designing high-reliability...
The water cleaning process of PCB circuit board uses water as the cleaning medium. A small amount (usually 2% to 10%) of surfactants, corrosion inhibitors and other chemicals can be added to the water. The PCBA cleaning process is completed by washing, washing and drying the source of pure water ...