+86 755 26978877
Our technical support
| MYDATA MY200（SMD Component Mounting Machine） |
| Can accommodate 40 kinds of standard 8*4MM CHIP components, the smallest PCB size 50*50/400*440MM, and the smallest maximum 0.6*0.3/32*32MM of components. The company’s three machines with a line, the efficiency of an hour up to 24000 /H, the minimum component is 0201 package size, as long as the surface is a flat element, not more than 32*32MM can be attached, the minimum distance of BGA in 0.40MM |
SMD Component Mounting Machine
| YAMAHA YV100X（SMD Component Mounting Machine） |
| Can accommodate 40 kinds of standard 8*4MM CHIP components, the smallest PCB size 50*50/400*440MM, and the smallest maximum 0.6*0.3/32*32MM of components. The company’s three machines with a line, the efficiency of an hour up to 24000 /H, the minimum component is 0201 package size, as long as the surface is a flat element, not more than 32*32MM can be attached, the minimum distance of BGA in 0.40MM |
SMD Component Mounting Machine
| （KWA-1016）Semi-automatic printing machine |
| For irregular PCB, such as no edge, round plate. Use steel mesh size 30*20CM, 37*47CM, 42*52CM, 55*65CM, steel mesh thickness within T=0.08MM-0.20MM range. |
Semi-automatic printing machine
| Full automatic （GKG2）Solder paste printing machine |
| Automatic optical alignment, automatic cleaning of steel mesh with set frequency, printing deviation up to 0.001MM, printing can only be done on PCB board with good coplanar property, which has high requirements on boards.A printing machine needs a steel mesh to print solder paste.The thickness of the tin paste scraped by the printer depends on the thickness of the steel plate.Can print 400*280MM boards.In the range of steel mesh size 30*20CM, 37*47CM,42*52CM,55*65CM,29 inches *29 inches, and steel mesh thickness T=0.08MM-0.20MM, IC printing with a spacing of 0.30MM is very effective |
Full automatic （GKG2）Solder paste printing machine
| Solder paste printing machine（MY500） |
| After offline editing and designing the program, the program can be transmitted to the device through the network, so as to spray the solder paste on the PCB welding disk directly as the printer does. The amount of solder paste can be effectively controlled without steel mesh.It can be modified immediately.The length of spray printing is 400*500, and the minimum size of particles is 0.33MM |
| Reflow soldering machine（820） |
| Heating plate, uniform temperature,8 temperature zones,PCB welding minimum size 50*50MM, maximum size 400*380MM.According to the characteristics of the product + solder paste melt characteristic curve of welding, take the mesh belt and orbital dc motor convey (through software control), the temperature deviation within 10 ℃.Divide the whole heating plate into several temperature zones for uniform heating. Welding military, medical, industrial control panel. Consumer electronics |
reflow soldering machine
| Wave soldering machine（NS-LF-350） |
| Maximum size of wave peak: 40*35CM equipment has four preheating zones and a lead-free tin furnace.The efficiency of batch production is improved, and the tin permeability of plug-in material is improved and unified |
Wave soldering machine
| Online AOI 3D inspection machine and Offline AOI 3D inspection machine |
| Check for faulty parts, small parts, reverse parts, vertical parts, virtual welding, offset, soldering, etc.Inspection of PCB ranges from (50*50-350*400) MM |
Online AOI3D inspection machine
| X-ray welding inspection and SPI solder paste inspecting machine |
| Mainly detects the welding condition of invisible welding points, such as BGA,QFN, module, etc., the welding condition of integrated IC with narrow spacing, whether the welding is short circuit or not, and the size of welding bubbles.When the equipment is working normally, the amount of radiation is small |
X-ray welding inspection
SPI solder paste inspecting machine
